View Trolley
|
Contact Us
Sub Total:
£0.00
Home
|
Shop
|
Login / Register
|
4 September 2010
Complete Kits
Power Units
Hoses and Attachments
Vacuum Hoses
Turbo Brushes
Vacuum Attachments
Installation Kits
Inlet Valves
Vac Pans
Installation Parts
IC180 – Universal Mounting Bracket with plaster guard
IC111 – Neoprene Seal
IC283 – Floor Mounting Adaptor or Adaptor Reducing Bush
IC2900 – Pipe Clip
IC2950 – 50mm End Cap
IC83 – Slip-on Hole Hider 76mm
IC230 – Solvent Glue 118ml
IC223 – Nail Guard
IT04 – Intumescent Fire Collar
IC70 – Low Voltage Wire
IC291 – PVC Pipe
IC150 – Cable Tie
IC298 – "Armaflex" Ducting Insulation
IC71 – Flexi-Hose
IC73 – "Jubillee" or "Terry" Clips 50mm
Couplings
Tools
Home
>
Installation Parts
Installation Parts
IC180 – Universal Mounting Bracket with plaster guard
Used for new build properties, or on stud partition wall in existing properties and can accommodate all of the many different types of inlet. This is screwed through it's "wings" to a solid wall or nailed to a stud partition upright before...
Click to view
£2.68
Add:
IC111 – Neoprene Seal
The inlet seal that is included with the metal mounting bracket (IC100). Can be used independently as a reducing bush when glued into a straight coupling (IC280) for installing an inlet onto an existing solid wall.
Click to view
£1.12
Add:
IC283 – Floor Mounting Adaptor or Adaptor Reducing Bush
An alternative to the neoprene seal above (IC111). Glues straight onto the pipe and provides a tight seal for inlets when mounting onto a floor or solid existing wall. (See installation manual)
Click to view
£0.69
Add:
IC2900 – Pipe Clip
Secures the 50mm PVC Pipe to walls or ceilings.
Click to view
£0.36
Add:
IC2950 – 50mm End Cap
Iinside diameter 50mm. Used to blank an open ended pipe and create an airtight seal. Should not be glued.
Click to view
£0.69
Add:
IC83 – Slip-on Hole Hider 76mm
Provides a neat collar around the pipe when going through an existing wall.
Click to view
£2.08
Add:
IC230 – Solvent Glue 118ml
PVC cement for gluing the pipes into the couplings. Only put glue onto the pipe when gluing a joint.
Click to view
£4.23
Add:
IC223 – Nail Guard
Secures onto timber "noggins" adjacent to pipe to prevent nails or screws from piercing the pipe when fixing the plasterboard
Click to view
£0.21
Add:
IT04 – Intumescent Fire Collar
Mounts around the ducting where it passes through a fire break wall.
Click to view
£19.42
Add:
IC70 – Low Voltage Wire
Low Voltage Wire per mtr Price on application
Click to view
£1.09
Add:
IC291 – PVC Pipe
Ducting 50.8mm/2" Outside Diameter. White 1.52m/5ft length (3m/10ft lengths are available - POA)
Click to view
£4.25
Add:
IC150 – Cable Tie
Securing the low voltage cable to the pipe. Price on application
Click to view
£0.04
Add:
IC298 – "Armaflex" Ducting Insulation
Use when running ducting underground to a detached garage. This should then be protected inside a 110mm soil pipe and should not exceed 3m. We recommend an alternative power unit location if possible. Per metre
Click to view
£4.64
Add:
IC71 – Flexi-Hose
Only for use directly behind a Vac-Pan to allow the repositioning of the kitchen kick board. A Vac-Pan is a pain to install without this small addition. for 500mm length
Click to view
£4.82
Add:
IC73 – "Jubillee" or "Terry" Clips 50mm
For use with IC71 above. Page 13
Click to view
£2.17
Add:
Sitemap
|
Terms and Conditions
|
Privacy Policy
Content © Central Vacuum Solutions.
Website designed by QCWebsites Ltd