View Trolley	\|	Contact Us
	Sub Total:	£0.00

Home | Shop | Login / Register | 4 September 2010

Tools

Please do not hesitate to contact one of our Installation Consultants for advice on tools that you may require to undertake your installation. There are special discounts on tools for Customers who purchase a complete system. We also offer a hire service for the rare occasions that a specialist tool may be required. E.g. Diamond core drills and angle-headed drills. Please ask one of our installation consultants for further details.

	IT01 – Suction Gauge Used to ensure that the system is working at full performance Click to view	£76.38 Add:
	IT03 – Pipe Cutters Handmade specifically for our size pipe. Not required unless you intend to install lots of central vacuums. A tenon saw works fine. Click to view	£111.63 Add:
	IT23 – 65mm Diamond Core Bit Excludes an arbor and pilot drill bit. This will drill through brick, stone and concrete and allows room for the wire and a coupling with a small amount of play. Our installers use this tool more often than IT27 Diamond Core Bit. Click to view	£24.44 Add:
	IT32 – 52mm Diamond Core Bit Excludes an arbor and pilot drill bit. Only needed when a tight hole is required for mounting an inlet on an existing solid wall. Click to view	£22.64 Add:
	IT27 – SDS Arbor for connecting Diamond Core Bits to the drill 200mm in length; combined with the depth of the core bit will allow you to drill through a standard cavity wall from one side. Use without hammer action. Click to view	£7.40 Add:
	IT26 – Hexagonal Arbor As above but for use with ordinary drills with 13mm chuck. Do not use with hammer action. Click to view	£7.40 Add:
	IT28 – Pilot dill for diamond core bit This is more of a centre guide rod than a drill bit. Always drill a pilot hole in the centre of the intended core hole first. Click to view	£2.51 Add:
	IT29 – Extension bars for the diamond core arbors (IT27 and IT28) Required if you are drilling a particularly deep hole. Click to view	£14.69 Add:
	IT40 – 57mm Wood Boring Bit Includes a 10.2cm extension shaft, 2 threaded pilot bits and Allen key. An excellent tool, but not really required for the average D.I.Y installation. Available to hire, please ask for details. Click to view	£71.91 Add:
	IT45 – 57mm Quality Bi-Metal Holesaw Will even cut through nails. Must be used with Holesaw Arbor (IT50) Click to view	£5.99 Add:
	IT46 – 64mm Quality Bi-Metal Holesaw Will even cut through nails. Must be used with Holesaw Arbor (IT50) Click to view	£6.71 Add:
	IT47 – 70mm Quality Bi-Metal Holesaw Will even cut through nails. Must be used with Holesaw Arbor (IT50) Click to view	£7.32 Add:
	IT50 – Holesaw Arbor for IT45, IT46 and IT47 Available for S.D.S. or normal hexagonal chucks Click to view	£6.35 Add:

Sitemap | Terms and Conditions | Privacy Policy